Poetry · Visual Art

Learning to Listen

by Melany Bell

Please enjoy this poem and images on listening, begat from my very own mind in 2022. Thank you for listening…
The images and poetry are by : ©MELANY BELL 2017-2022 all rights reserved  

Artist Statement:

I am an Ambidextrous Painter, Scientist, Step-Mother, Lover of Lady’s & their Others.
A Whore a Coward, Liar a Judas
A Free-dome seeking Teacher of Our collective Futures
Made to own Our GrandCestors spaces
reinterpretation of
Shape, Sound Frequency, re-speculating the birth of WE
I am the Word & World created on a stage, page, tone or face
Representing, & recreating a state of a Mind, for the race to BE Human.
I am Preaching Precious Story’s
Mirrors we’re constantly living up to reflecting on,
Herstory’s. Infinite iNtelligence too deep to be Respected
all to make rhyming come back
like when the Last Poets just met
When lazy Saturdays meant SMURPH’S
Prince had not yet worn their bottomless pants
I am UN-comforting white pages turned brilliant
With beats on the backs of breakdowns
An Ali of mental graphics
Shakespeare of word gymnastics
To art like butter to fat is
No attempt, just doing I.t.

Mixed Media · Visual Art


PWA Participant Artist Allene Steinberg created this beautiful mixed media piece (charcoal and pastels on colored paper) of her cat, Gloria Rose. “My two loves, trees and Gloria Rose…”

Mixed Media drawing of a cat (charcoal and pastels on colored paper), “Gloria” by Allene Steinberg

“Our task must be to free ourselves from this prison by widening our circle of compassion to embrace all living creatures and the whole of nature in its beauty. “ ~Albert Einstein

History · Writing

The Mural of Unusual Size

photo courtesy of Angela Michaelina

Everyday when I wake up, the first thing I see when open the curtains of my balcony door, I see a certain mural. This mural is very hard to miss because it takes up the side of three steel-framed, yellow brick buildings, the primary building being five-and-half stories tall. This piece of art is the primary reason why I am glad to have apartment on the side of the building that is located. I know that one of my neighbors is of the opinion that a child designed this, but judging by that comment, I realize that he doesn’t have much knowledge about the technical aspect of art. Everybody’s a critic.

Because of the mural’s enormous scale, the title of the mural is “The Mural of Unusual Size.” This piece was designed and painted in 2017 by HENSE, an artist from Atlanta, Georgia and was part of a project to revitalize blighted properties in the city. The painting required 170 gallons of paint to complete. While I was glad to learn this information, I wanted to learn a bit more, as I’ve never been pleased with answers on a superficial level. In particular, I wanted to learn a bit more about the building.

I knew that the buildings were currently occupied by an audio-visual consultant and an automotive repair garage, but I didn’t know anything about the building’s past. Someone had told me that it was once an old factory, but they did not elaborate beyond that. And for all I knew, what they told me was incorrect. I tried searching for the desired answers online, but I only got articles about the creation of the mural. I knew that someone had the answers. So decided to contact the artist—maybe someone had told him of the site’s history when he took on that job. I sent him an e-mail through the contact form on his site. A couple of days later, I thought of someone else who might be more helpful: the Washington County Historical Society. So I sent them an e-mail, too.

While I still have not heard back from HENSE, the office admin of the historical society suggested that I should check the Maryland Historical Trust’s website. Turns out that that was an excellent piece of advice. Using Medusa’s, their online database, map tool, I found an application from when the building applied for historical status.  I had learned that the building was once the site of D.A. Stickell & Sons Feed Manufacturing. This company was both a flour and feed producer. The building was constructed in 1947 and continued to operate until some point in the 1950s. Through this information, I was able to locate some of the burlap sacks that they used through online antiques dealers:

photo courtesy of powerballteresa

photo courtesy of lowerferryflair

photo courtesy of fordnut88

But to dig even deeper and farther back, another mill occupied the location of D.A. Stickell & Sons prior to its existence. According to the application, the site was once the place for the Anchor Milling Company. Reportedly, one of the old warehouses that stands there belonged to them and is dated as 1919. I cannot find much information about this particular company. I do come across information about an Anchor Milling Company that had once existed in Missouri, but I cannot figure out if this is the same company. What makes determining this more confusing is that I found information about a family that lives in Miller County, the site of the Missouri Anchor Milling Company, who originally lived in Hagerstown, Maryland prior to immigrating from Switzerland, and that people in this very same family worked for the mill in Missouri. I cannot figure out if the connection to Hagerstown is a mere coincidence or not. And what muddies the waters even more is that there was an Anchor Milling Company in Ohio at some point, too. Was that one in any shape or form connected to the other Anchor Milling Companies? Prior to starting this post, I thought I had my dots connected, but a second look has made me realize otherwise. I suppose asking the Miller County Historical Society could clarify matters.

There is even something more baffling that I have come across. I had found an ad for D.A. Stickell & Sons, but it is filed as being from 1915 in the digital library of WHILBR, Western Maryland’s Historical Library. I had originally not noticed that date, and assumed it was from the time frame that was reported on the aforementioned application. But looking a bit more closely at the artwork and typefaces, I highly doubt that the ad was from the 1940s or 1950s and that the year it is filed under is correct. (Printed ad artwork and typefaces throughout history is another subject that would make for an interesting post, but that is aside my overall point.) While the location has a different building number than what the building currently has and was filed as having in the historical status application, I am sure this is for the same buildings. Either the number in the ad is a typographical error or the buildings had a different (but similar) number at that time. I am certain that this ad is for the same location as the cross street that is mentioned is the same one that is where the mural is located. Perhaps these were entirely different structures that had been demolished at one point. But even if that were the case, why does the information in Medusa allude to the Anchor Milling Company being there at that time? For that matter, 1915 predates the existence of the Anchor Milling Company existing in Hagerstown by four years. Did the Anchor Milling Company buy D.A. Stickell & Sons and the former name was kept?

While I am a bit flustered that my question has yet to fully be answered like I thought it was (and perhaps it never will be), the buildings are a bit less of a mystery. Ironically, this newly acquired information does not paint a clearer picture of the artwork itself, and the mystery is as tangled as the artwork itself.

Inspiration · Visual Art

How to Make Homemade Gelli Plates

I think I’m confident in saying that regardless of anyone’s income, the vast majority of artists like to save money when purchasing their materials. This is no exception for anyone who uses Gelli plates for their printmaking. For those uninitiated with Gelli plates and printing, one coats a slightly sticky, thick sheet of gelatin with a thin layer of water-soluble ink or paint; this coated sheet is then pressed against a non-glossy leaf of paper. Before pressing, the ink or paint can be moved about with an applicator, stamped or stenciled onto, or gently scraped from the paint to form images. Thin, flexible objects can also be placed in between the coated plate and paper to form shapes on the paper that are devoid of ink. There are other techniques that can be utilized, but I were to explain them, I would be deviating a bit too much from the purpose of the post. Some of the classes Teaching Artist Laurie Brown has taught for Path with Art have utilized these items.

To connect the issue of expense and income with the acquisition of art supplies and Gelli plates, if you had visited the above link to the store page for Gelli Arts, you may have noticed something concerning: the plates have a steep price tag! A 3 inch by 5 inch plate costs $12.95, not including taxes, shipping, and other fees. Keep in mind that the dimensions of this plate are not even the size of a standard postcard. But fortunately, there is a more cost-effective way to obtain Gelli plates: by making them yourself.  And even better, the process of making them is not laboriously intense nor does it involve many ingredients. But keep in mind that access to a kitchen burner and basic kitchen equipment are involved in this process, as I know that some of you who are reading this article do not have regular access to either of these.

The recipe and instructions I am sharing with you is a modified version of the process found on The Frugal Crafter’s blog.  I found that the instructions she gave did not allow for the plates to congeal adequately, resulting in plates that were too soft and delicate for use. I also wanted to be much more specific in my instruction so that you are less likely to encounter any issues. Any grade of glycerin (craft, medical, or consumable) can be used for this project. Also, I included the optional ingredient of peppermint oil or clove oil for the sake of adding an additional preservative, making the plates without it will work perfectly fine, as the addition of glycerin helps prevent any spoilage that would normally occur without it. If you decide to use either of these oils, make certain that you are using essential oils, not flavoring oils for use in baking and candy making, and to gently wash the plates with dish soap after the plates are ready for use, as the excess oil may repel ink or paint a bit.

Permanent Homemade Gelli Plates

photo courtesy of Angela Michaelina


  • 15 tablespoons gelatin (or 15 Knox gelatin packets)
  • 1½ cups glycerin
  • 1½ cups boiling hot water
  • 3 to 5 drops peppermint or clove essential oil (optional)


  • 2-quart heat-safe bowl (can be larger, if you do not have smaller bowl available)
  • 2-cup liquid measuring cup
  • dry measuring cups
  • measuring spoons
  • large mixing spoon
  • small saucepan
  • paring knife
  • rubber spatula
  • baking sheets, heat-safe plates, heat-safe bowls with broad bases, or other similar containers (has to be at least ¼ inch deep)
  • dish soap and water (if needed)
  • paper towels (if needed)
  • clean, sharp scissors (optional)
  • plastic zipper bags and/or firm plastic sheets trimmed to the width and length of containers


  1. Measure and add 15 tablespoons gelatin, 1½ cups glycerin, and 3 to 5 drops of peppermint or clove essential oil (optional) to a 2-quart heat-safe bowl. Mix the ingredients until they are fully incorporated and no lumps remain.
  2. In a small sauce pan, bring 1½ cups of water to a full boil.
  3. Add the heated water to the bowl containing the gelatin, glycerin, and oil mixture.  Mix until well-blended and gelatin is fully dissolved.
  4. Quickly pour mixture into desired container. Make mixture coats the inner base of the container completely and is at a depth of at least ¼ inch. Ensure that the container sits on a level surface.
  5. Allow for the container to remain undisturbed until fully cooled and that the mixture forms a very firm gel. This process will take several hours, but letting the mixture set overnight will ensure the proper consistency.
  6. With a paring knife, very carefully insert the blade against the inner edge of the container and glide it against the entire inner perimeter of the container. Take care not to tear the gel sheet.
  7. Insert the blade of a rubber spatula and glide it along the same path you made when you used the paring knife. 
  8. Carefully slide the rubber spatula under the edge of the gel sheet. Slowly lift the spatula once the blade of it is fully inserted, taking care not to tear the gel sheet.
  9. While the gel sheet is elevated, gently grab the gel sheet with your free hand. Very slowly peel the gel sheet from the container, once again ensuring that the gel sheet does not tear.
  10. If you had used some essential oils, very gently wash the outer surfaces gel sheet under running water with a very small amount of dish soap. Do not use any washcloths, sponges, or scouring pads to clean the sheet—use your hands. Lightly blot any water from the surface with a dry paper towel to speed up the drying process.
  11. (optional, but recommended) With a clean pair of sharp scissors, trim any ragged excess gel from the top edge of the gel sheet.
  12. Store the gel sheet between plastic sheeting cut to the length and the width of the gel sheet and/or insert the gel sheet into a plastic zipper bag. (I recommend both because sliding gel sheets into plastic zipper bags alone can be a clunky process. And storing the gel sheets between plastic sheeting alone can still leave the edges of the plates exposed, possibly inviting dust to stick to their edges. While you can wash any stuck dust off, storing them in the bag allows you to not take that additional step.)

photo courtesy of Angela Michaelina

If you find yourself accidentally tearing the sheet at some point during the process, fear not. Depending upon the material and dimensions of the container you are using, you can pop the container with the hardened gel in it into the microwave for about a minute to melt the gel. And if you are using a container that is too larger and/or not microwave safe, you can always tear up the gel and place it into a saucepan, and melt the gel over low heat on the stove. Once the gel is fully melted, if poured back into the container if needed, you allow for the gel to properly set again, and you can make another attempt at removing the gel sheet.

Another perk to making your own sheets is that you can make a more varying array of plates of different shapes. To give you an idea of what I mean, take a look at the photo I have displayed below. The sheet in the bottom right corner is one that has been commercially produced. The other sheets are ones I have made myself. (The reason why the rectangle and oval have a white foam on their top surface is that I had used an immersion blender to mix them. I do not recommend doing this nor using a standard blender or food processor.)

photo courtesy of Angela Michaelina

Seeing that the FAQ page on the Gelli Arts website mentions that their plates do not contain products derived from animals, I would presume that you could use agar agar to make them. (I get the feeling that carrageenan or pectin would produce plates that are too soft.) Perhaps one of these days, I will experiment with it—if I do, I’ll be sure to provide an update.

Before I close this post, if you are unsure of where to begin with using gel plates, check out the printing basics category available on Gelli Arts’ website. They can provide far more information and techniques than I could. At a quick glance, I can see that they suggest some ideas that haven’t occurred to me!

Community · Partners

The Art of Harborview Medical Center

I invite you to take a look at some of the artwork created by the talented staff of one of our amazing Social Service Partners, Harborview Medical Center. Click here for more inspiration for our upcoming Spring quarter photography and portraiture classes, as well as wood, fiber, jewelry, and much more!


“Structured in Seattle”

I took up film photography last year – it’s been a great way to explore both the city and my creativity.

Rebekah Zaharia, Academic HR Manager, General Internal Medicine


“Portrait of Sheryl Feldman”

Andrea Gahl, RN, Trauma Nurse Coordinator, Department of Surgery

This is a portrait of my friend Sheryl Feldman. She is a writer, filmmaker, climate change activist, and co-founder of Hedgebrook, a women’s writers retreat on Whidbey Island. 32×32, oil on canvas.

“Diamonds are MMs BFF”

Jamie Leeds, Program Operations Specialist
Supply Chain Management

“Gladys A. Bentley”

Nikki Harris – Dones, Medical Assistant Sleep Clinic

Gladys A. Bentley (Aug. 12, 1907 – Jan 18, 1960) “was a Gender-bending American Blues Singer, Pianist, and Entertainer during the Harlem Renaissance. She was a pioneer in pushing the envelope of gender, sexuality, class and race. ” She played a major roll early on the Black Queer community. This piece is mixed media of painting with pens, marker and paper.

Community · Visual Art

Exhibitions in 6×6 Format

Something I try to do in hopes of promoting my artwork is entering exhibitions. I’ve fallen behind in this practice, but now that my living situation is stable once again, I am returning to doing this. Finding exhibitions that are affordable can be difficult, as I have little money to spare. Despite that, I had prior knowledge of one that occurs annually and doesn’t have an entry fee that will break the bank: RoCo 6×6.

RoCo 6×6 is an exhibit that the Rochester Contemporary Arts Center has every year. Anyone can submit up to four entries, which are each to have surfaces that measure six inches by six inches. By “anyone,” I mean artists of all ages and skill levels, and from anywhere in the world. While there is no registration fee, most artists will have to pay shipping costs.

Why does this arts center have this exhibition? This event serves as their only fundraiser, as the center sells each piece of artwork for $20.00, both on site and online. Unfortunately, artists do not get a cut of these proceeds nor do they have any unsold artwork returned to them, as unsold pieces will continue to be for sale online at a discounted price.

To give you an idea of work that might be submitted, below are the four pieces I created.

“Union” by Angela Michaelina, March 2022
“Structure” by Angela Michaelina, March 2022

“Autonomy” by Angela Michaelina, March 2022

“Harmony” by Angela Michaelina, March 2022

Despite that, a week ago, I had learned from another Path with Art artist that there is a similar exhibition held by an organization in Shoreline, Washington, 6X6NW. This show allows for you to enter ten pieces of artwork, each on a six inch by six inch surface. Or if you are someone whose forte is in the realm of photography, you may enter ten photos that are to be displayed at eight inches by eight inches. While there is a $6.00 flat entry fee for registering if you are not a pre-K to twelfth grade student (and from what I interpret from the guidelines, you can submit both photos and artwork, yet you would pay $12.00, as the artwork and photos seem to be managed as two separate entities—contact the organization for clarification), I know that a portion of this blog’s intended audience can bypass shipping fees by dropping off pieces in person. Also, photo entries can be submitted electronically, each file needing to be at least 800 pixels by 800 pixels. 

While 6X6NW is similar to RoCo 6×6 in that you will not be returned any unsold artwork, a huge plus is that you can earn forty percent commission for your art that sells. Each piece is going to be sold at $36.00 during the time of exhibition, so you can earn $14.40 for each sold work. There also are awards given for People’s Choice, Sponsor’s Choice and Director’s Choice.

There is still time to enter the 2022 iteration of this show—for that matter, registration hasn’t even opened yet! Registration will occur in June 2022, so keep your eyes on their website!

Drawing · Visual Art

St Patrick’s Day Inspiration

PWA participant artist Tim Bridge loves using lots of different colors: pinks, blues, yellows, greens.

“Since St Patrick’s day is on Thursday, that is the look I was going for,” said Tim of his latest creation. One person described Tim’s work as reminding them of “the promise of spring.”

Tim is a regular at Path with Art’s Open Studio on Mondays from 3:30-5:00pm, which is currently held virtually. “We are one big happy family when it comes to art on zoom,” says Tim. “We are all artists in our own special way.”